\n";
str+="1 | \n";
str+="\n";
str+=" What is a point to point leased circuit? |
\n";
str+="2 | \n";
str+="\n";
str+=" What are the purposes for which a point to point circuit could be leased? |
\n";
str+="3 | \n";
str+="\n";
str+=" How does tariff for a leased circuit differ from a switched circuit over public switched network? |
\n";
str+="4 | \n";
str+="\n";
str+=" What is networking as different from a point to point circuit? |
\n";
str+="5 | \n";
str+="\n";
str+=" Where to apply for getting a point -to-point leased circuit? |
\n";
str+="6 | \n";
str+="\n";
str+=" What is the procedure for getting a leased circuit in Network configuration \n";
str+="and what details/documents have to be supplied to DoT? |
\n";
str+="7 | \n";
str+="\n";
str+=" Can one leased circuit be used by more than one legal entities? |
\n";
str+="8 | \n";
str+="\n";
str+=" What is a Closed User Group (CUG) Private Telecom Network? |
\n";
str+="9 | \n";
str+="\n";
str+=" What are Dedicated (Captive) Private Networks? |
\n";
str+="10 | \n";
str+="\n";
str+=" Is PSTN access permissible on a voice leased circuit/Dedicated network? |
\n";
str+="11 | \n";
str+="\n";
str+=" Is the PSTN/Telex/PSPDN access permissible on leased data circuits? |
\n";
str+="12 | \n";
str+="\n";
str+=" What type of equipment can be used on leased circuits? |
\n";
str+="13 | \n";
str+="\n";
str+=" Is it possible to install a dedicated link between DTS exchange \n";
str+="and subscriber premises for extending circuits? |
\n";
str+="14 | \n";
str+="\n";
str+=" Can the international point to point leased \n";
str+="circuits be connected on leased line networks in India? |
\n";
str+="15 | \n";
str+="\n";
str+=" Where to apply for international point to point leased circuits ? |
\n";
str+="16 | \n";
str+="\n";
str+=" Whether to charge per 2 wires or 4 wires \n";
str+="for the local leads provided for circuits (upto 64 kbps circuits) ? |
\n";
str+="17 | \n";
str+="\n";
str+=" Is shared use of leased circuits permitted? |
\n";
str+="18 | \n";
str+="\n";
str+=" Is the resale of the leased circuits to others permitted? |
\n";
str+="| | \n";
str+="What is a point to point leased circuit? \n";
str+="A point to point leased circuit is provided between two offices \n";
str+="of the same subscriber either in the same city or in any two different cities.\n";
str+=" |
\n";
str+="| | \n";
str+="What are the purposes for which a point to point circuit could be leased? \n"
str+="Leased circuits can be used for internal communication requirements of the subscriber \n";
str+="by connecting normal telephone sets (for hot lines) , EPAXs,computers, Teleprinter, SFT etc.\n";
str+=" |
\n";
str+="| | \n";
str+="How does tariff for a leased circuit differ from a switched \n";
str+="circuit over public switched network? \n";
str+="While in case of a leased circuit there is only one recurring charge \n";
str+="i.e. annual rental , in case of switched circuits over Public Switched Network, \n";
str+="call charges are also to be paid in addition to line rentals. |
\n";
str+="| | \n";
str+="What is networking as different from a point to point circuit? \n";
str+="A leased circuit is considered to be a part of a network \n";
str+="if it is connected at either end to a piece of equipment which is further connected \n";
str+="to to a leased line either directly or through another set of \n";
str+="inter-connected equipment.\n";
str+=" |
\n";
str+="| | \n";
str+="Where to apply for getting a point -to-point leased circuit? \n";
str+="Application should be made to the Commercial Officer in charge \n";
str+="of your area in a prescribed form which is available on payment of Rs 10/-. \n";
str+="A registration fee of Rs 1000/- is payable.\n";
str+="For further details regarding the concerned officer to whom the application\n";
str+="is made ,please contact office of head of the local telecom administration.\n";
str+=" |
\n";
str+="| | \n";
str+="What is the procedure for getting a leased circuit in Network configuration \n";
str+="and what details/documents have to be supplied to DoT? \n";
str+="Applications for leased circuits in network mode should be made to Director(CS) \n";
str+=", DTS, 20 Ashoka Road, New Delhi-1 on plain paper as per proforma details in Part II.\n";
str+="These application will be examined and permission conveyed, \n";
str+="normally within a period of about four weeks after the application is complete \n";
str+="with all the details.The applicant will take further action as per the above procedure.\n";
str+=" |
\n";
str+="| | \n";
str+="Can one leased circuit be used by more than one legal entities? \n";
str+="Leased circuit can be used by more than one legal entities \n";
str+="if they form a Closed User Group.\n";
str+="The closed user group cases are examined in the ‘CS’ Branch, \n";
str+="Department of Telecom Services, Sanchar Bhawan, New Delhi on case by case basis.\n";
str+=" |
\n";
str+="| | \n";
str+="What is a Closed User Group (CUG) Private Telecom Network? \n";
str+="The cases can be considered for setting up a closed user group private network \n";
str+="consisting of following categories of leases: \n";
str+=" - Producer of goods and his whole -sale traders/agents.
\n";
str+="- Provider of service (not being a telecommunication service) and his whole-sale traders/agents.
\n";
str+="- Producers of same categories of goods.
\n";
str+="- Providers of the same category of service.
\n";
str+="- Holding company and its subsidiaries.
\n";
str+="- Interconnected undertakings.
\n";
str+="- Companies under the same management.
\n";
str+="Provided that ultimate consumer of the product or service shall not be a part \n";
str+="of the closed user group and also that the network \n";
str+="will be used purely for legitimate internal communication purposes of the group \n";
str+="where resale of telecommunication service and its profits are not involved.\n";
str+="In respect of companies against 5,6 and 7 \n";
str+="above,the definitions available in MRTP Act 1969 will be taken.\n";
str+=" |
\n";
str+="| | \n";
str+="What are Dedicated (Captive) Private Networks? \n";
str+="Captive networks are those networks in which , the equipment and facilities \n";
str+="are owned and operated by licensee itself.\n";
str+="Third party ownership and provision of services is not covered under \n";
str+="the category of private network. \n";
str+="Such networks are normally permitted to public utilities \n";
str+="for their specialised requirements.\n";
str+="Requirements of other users are met mostly from the DTS network.\n";
str+=" |
\n";
str+="| | \n";
str+="Is PSTN access permissible on a voice leased circuit/Dedicated network? \n";
str+="No. It is not permitted.\n";
str+=" |
\n";
str+="| | \n";
str+="Is the PSTN/Telex/PSPDN access permissible on leased data circuits? \n";
str+="Yes ,it is permissible on payment of appropriate tariff. \n";
str+="In case of PSTN and Telex only incoming access into the private networks \n";
str+="is permissible.The application for such access has to be made to Director (CS).\n";
str+=" DTS,Sanchar Bhawan , 20 Ashoka Road, New Delhi - 110001 \n";
str+="with details of interface equipment and number of extensions required with justification thereof.\n";
str+="Such access does not authorise the user to commercially exploit the facility \n";
str+="in any way.The resources like telephone connection/telex connection \n";
str+="/PSPDN connection have to be separately obtained as per prevalent procedure.\n";
str+=" |
\n";
str+="| | \n";
str+="What type of equipment can be used on leased circuits? \n";
str+="Equipment to be connected to the leased lines are to be Interface \n";
str+="Approved from the Telecom Engineering Centre of DoT.\n";
str+="One time connectivity approval may be granted for interface equipment \n";
str+="imported by subscribers for their own use.\n";
str+="While purchasing equipment through suppliers / manufacturers in India ,\n";
str+=" the subscribers should insist on suppliers for valid interface approval certificate.\n";
str+=" For one time connectivity approval for equipment imported by him for his own use,\n";
str+="the subscriber should approach CGM of concerned telecom circle/ ‘CS’ \n";
str+="Branch of Deptt. of Telecom Services , New Delhi.\n";
str+=" |
\n";
str+="| | \n";
str+="Is it possible to install a dedicated link between DTS exchange \n";
str+="and subscriber premises for extending circuits? \n";
str+="When the requirements of local circuits is large or when no reliable \n";
str+="DTS medium is available to extend the circuit to subscriber premises,\n";
str+="DTS can provide dedicated link on rent and guarantee basis. \n";
str+="(Wherein the Deptt. bears the initail cost and charges). \n";
str+="Normally the preferable option is that subscriber bears the initial cost \n";
str+="of the link and DTS maintains the link at both ends at prescribed rates.\n";
str+="These works are called contributory works.\n";
str+=" |
\n";
str+="| | \n";
str+="Can the international point to point leased \n";
str+="circuits be connected on leased line networks in India? \n";
str+="International circuits leased in the name of applicant can be permitted \n";
str+="inter-connection with private networks of the applicant. \n";
str+="Leased line connectivity to foreign public \n";
str+="network either directly or indirectly is not permissible.\n";
str+=" |
\n";
str+="| | \n";
str+="Where to apply for international point to point leased circuits ? \n";
str+="Application can be made to the Commercial Officer \n";
str+="of the exchange area in which one end of circuit is to be terminated. \n";
str+="He will take further action for getting international connectivity through VSNL.\n";
str+="For 64 Kbps international leased circuits , application should be made to VSNL.\n";
str+=" Information required to be sent by Application for \n";
str+="permission to setup a private network. \n";
str+=" - LEASED LINE NETWORKS:
\n";
str+="Name and address of the party and mainlines of business. \n";
str+="Locations of the circuit ends with addresses. \n";
str+="Whether it is single party network or a closed user group network. \n";
str+="If closed user group network; names and addresses of various users\n";
str+=" and their nature of business and their legal relationship \n";
str+="with the party(applicant). \n";
str+="Purpose for which circuits are required. \n";
str+="Whether necessary permission from other authorities \n";
str+="( if any required) has been obtained for purpose mentined in S No. 5\n";
str+=" and details thereof. \n";
str+="A neat sketch of the existing (if any) and proposed network \n";
str+="showing various location along with details of proposed equipments ,\n";
str+="leased data circuits etc. ( a typical sketch is given in figure A) in triplicate.\n";
str+=" Please give details of existing point to point leased circuits \n";
str+="and PSTN connection if any as well ,with their dates of commissioning. \n";
str+="Whether the circuits required are for speech or data communications \n";
str+="or combination thereof. For data circuits, mention the required data rates also. \n";
str+="Name and Model No. of equipments at each location like EPAX, \n";
str+="Mdem,Telephone Set, Multiplexor, Concentrator , Host Computer etc. \n";
str+="(State whether DCE equipments are interface approved by DTS). \n";
str+="Technical specifications of DCE ( if not already on DTS approved list) \n";
str+="and DTE and Communication interface for DTE (in triplicate). \n";
str+="Location-wise details of PSTN/PSDN/Telex access \n";
str+="required in case of data network. \n";
str+="Any other specific information pertaining to the requests for the network.
\n";
str+="DEDICATED (CAPTIVE) NETWORKS :
\n";
str+="Following information is also to be submitted in addition to the points \n";
str+="given in II(a) above; \n";
str+=" Complete addresses of the locations. \n";
str+="Purpose / justification for \n";
str+="setting up the network and for capacity of the network. \n";
str+="Type of medium and specification of equipment to be used. \n";
str+="Link budget, frequency plan and complete engineering details for radio links. \n";
str+="In case of satellite network , the transponder power and \n";
str+="bandwidth requirements .Only extended C-Band transponder of INSAT is to be used.
\n";
str+=" |
\n";
str+="| | \n";
str+="Whether to charge per 2 wires or 4 wires \n";
str+="for the local leads provided for circuits (upto 64 kbps circuits) ? \n";
str+="The rates communicated in the tariff orders are per pair (2 wires) only. \n";
str+=" Exception: The local lead of 2 wires or 4 wires is dependent on the type of modems \n";
str+="used by the customers and for the 64 kbps circuits normally the customers \n";
str+="are using ASM 20 modems which work on 4 wires.\n";
str+="Hence, it has been decided that normally 2 wires will be provided as local lead \n";
str+="and if any customer is seeking 4 wires for local lead, \n";
str+="on declaration that they are using the ASM 20 modems.\n";
str+="In such cases, it has been decided that 4 wires local lead will be provided \n";
str+="without multiplying by 2 of the normal rental. \n";
str+=" |
\n";
str+="| | \n";
str+="Is shared use of leased circuits permitted? \n";
str+="Except for sanctioned closed user group,shared use is not permitted.\n";
str+=" |
\n";
str+="| | \n";
str+="Is the resale of the leased circuits to others permitted? \n";
str+="No. Users are provided leased circuits only for their internal requirements.\n";
str+=" |
\n";
str+="| ";
str+=" ";
str+="Top";
str+=" ";
str+="";
str+="Back |
\n";
str+="